![Grace Technologies_FC_White Text.png]](https://www.graceport.com/hs-fs/hubfs/Grace%20Technologies_FC_White%20Text.png?height=40&name=Grace%20Technologies_FC_White%20Text.png){kind=small}
GraceSense™ Predictive Maintenance System
Datasheets
Installation Guides
Articles
Videos
Webinars
- An Introduction to Vibration Analysis | Part 1
- An Introduction to Vibration Analysis | Part 2/3
- An Introduction to Vibration Analysis | Part 3/3
- IIoT or PLC Vibration Monitoring: Which is Right for You?
- IIoT-Based Predictive Maintenance Technologies Enhances Plant Safety and Reliability
- Vibration Analysis of Rolling Element Bearings: Focus on Failure Stages
- Basics of Gear Analysis; A Vibration Topic
- 24x7 Vibration Monitoring of Rotational Assets Using IIoT Devices and Your PLC
- The Four Keys to a Successful IIoT Solution for Predictive Maintenance
Case Studies
FAQ
- Q: How is vibration and temperature data transmitted from my asset to the system?
- Q: What is the GraceSense Predictive Maintenance Wireless Network Topology?
- Q: What if I do not want to use Wi-Fi, or no Wi-Fi network is present?
- Q: What’s the difference between a Wireless I/O Portal and a CloudGate?
- Q: What is the warranty on the GraceSense Predictive Maintenance System?
- Q: How many hard-wired sensors can I connect to a Wireless I/O Portal or CloudGate?
- Q: What is the battery life of the Vibration and Temperature Sensor (G-FM-VBT-BAT)?
- Q: What happens if my battery dies on my Vibration and Temperature Sensor?
- Q: What Application Interfaces are available and how many can I have?
- Q: Which is the most common condition monitoring technique?
- Q: What is a condition monitoring sensor?
- Q: What are the 5 elements of condition monitoring?
- Q: What are three types of condition monitoring?
- Q: What are examples of condition monitoring?
- Q: What are the 5 types of sensors used in control systems?
- Q: What are the different types of sensors for structural health monitoring?
- Q: What are two types of sensors used to monitor engine conditions?
- Q: Can I bring data from the Vibration and Temperature Sensors into my PLC or SCADA/DCS system?
- Q: Why would I want to add another CloudGate to my system?
- Q: What does the system architecture typically look like?
- Q: What if my application doesn’t support wireless sensors, but I still want to use your IIoT Platform for my predictive maintenance needs?
- Q: What is an Application Interface and why should I use it?
- Q: What types of sensing can be done with your IIoT system?
- Q: Can I have more than one CloudGate in my installation?
- Q: How far apart can the GraceSense™ Vibration and Temperature Wireless Sensors and CloudGate be installed?
- Q: Can I use my company’s data plan for an LTE cloud connection?
- Q: How Do I Connect a GraceSense™ CloudGate to a Wi-Fi Network?
- Q: Are the Vibration and Temperature Sensors (G-FM-VBT-BAT) outdoor rated?
- Q: Does the Condition Monitoring Solutions offer repeaters as a way to extend the range of the sensors signals?
- Q: Are the Condition Monitoring Solutions Class 1 Div 1 rated?