General
Order Information
Webinars
- LIVE: Electrical Safety Panel Discussion | Part 1
- LIVE: Electrical Safety Panel Discussion | Part 2
- Changes to IEEE 1584 Standards, 2018 Edition: How to Perform Arc-Flash Hazard Calculations
- NFPA 70 (NEC) Article 430: Understanding Motors, Motor Circuits, & Controllers
- Minimizing the Risk of Electrical Hazards (Safety-by-Design)
- NFPA 70B: Why Electrical Preventive Maintenance Programs are Critical for Safety
- Accountability Systems: From Good to Great in Safety
- NFPA 70E: Importance of Risk Assessment in Electrical Safety Programs
- Understanding Arc Flash Hazard Analysis
- Are you a Qualified Electrical Worker according to NFPA 70E?
- NFPA 79 & 70E: Importance of Electrical Safety in Industrial Control Panels
- ISO 55000: Overview of Asset Management with a focus on Industrial & Commercial Equipment
- Electrical Safety in Substations
- Is the thought of Power Transformer failure keeping you up at night?
Webinar FAQs
- What requirements apply to panels that have up to 120 volts, and the components do not have exposed contacts?
- What rules apply to work on live electrical panels in regard to the safety of others around?
- Is it considered energized work if I open the box and they're all energized THHN wires in the box, but no splices?
- How often should you run electrical safety audits on your electrical crews?
- Is the practice of grounding out electrical wires on an existing panel, even when power is removed, a good idea in all cases?
- Should Personal Protective Equipment (PPE) be required for each electrician working live, or should electricians be sharing their PPE?
- Is it considered energized work if panel board MCB is off, and adding wire to brand circuit breaker? What if MCB is on and the circuit breaker is off?